45 Degree Angle Stand for Ikea Omlopp LED Spot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angle Stand for Ikea Omlopp to showcase figurines or similar.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Hi,
This is a spotlight stand in a 45 degree angle. One side is open for the cables. (You're not supposed to see the open side anyway.)
Mirror it if needed. Or just turn it around, please be aware though that I did not place the hole for the spotlight at the middle. This was on purpose.
It's a tight fit. You might want to remove the flexible silicons on the side, if you have troubles inserting it properly. Also be careful. The walls are kinda thin. (I didn't want to waste too much filament and I am a beginner at designing. Sorry.)
I've only printed this on my Prusa i3 Mk3s. I don't know how other printers work with this model.
Print it so, that the hole is on the side. (Screen attached)
I printed without supports.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Infill:
20
Category: Decor