1 / 3
PNW Loam Dropperpost Lever - Magura Shiftmix 3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptermount for PNW Loam Dropperpost Lever to mount on Magura Shiftmix 3 (Sram matchmaker)
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 947
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (17)Powiązane
I think there is no specific mount aviable so i make one.
Recommend a 0.12mm layer height with 5 wall thicknesses. PETG or ASA/ABS
Required: 1x M5 threaded insert and 2x M4x10mm Bolts
The threaded insert is melted from the underside. This gives the component generally a high level of stability and rigidity like an aluminum part. Even on a high leverforce there is no flex in the system.