Liczymy pasujące modele…
Update 2023: Bought an MT8 and added a fitting for it here. --- You want to customize your Magura MT5/MT7/MT8/MT Trail Calipers without spending a fortune on those expensive plastic rings? Look no further, this model has you covered.…
This is a Magura plastic clip for transporting your mountain bike with the wheels off. All dimensions and measurements were carefully taken from an original Magura pad spacer. Print with supports with the flat side facing down and the…
As described above - 4 off versions currently. I had better success printing in PETG with textured spring steel sheet, as the PLA did not want to seem to stay stuck - YMML. Updated 12/11/2022 to include ‘Nukeproof’ logo type model…
Hey guys, I felt the need for a simple solution to adjust/fine tune the reach of my MT5 brake levers without having to find a 3mm hex and designed this little piece. Fits great on my HC 1-finger levers. Should also fit other Magura brake…
Crafted with precision and adjustability in mind, this adapter ensures a secure and ergonomic fit, allowing you to optimize your bike's cockpit for a cleaner, more efficient setup. No need for extra clamps or complicated adjustments – our…
Tool to center his Magura MT5 or MT7. I use it on my 208mm disc. This is how it is done: Remove wheel Brake shoes push back Loosely screw the brake caliper Insert wheel again Place the gap tool on the brake disc in the direction of…
Beside the existing model for the 4 piston brakes (MT7/MT5), I've created the decoration rings for the 2 piston brakes (MT5 Trail, MT8, ….) It can be printed in PLA and need no support It can be printed in vasemode, but no need for this.
Wanted to make a little color for my bike.
Used to combine mounting points for magura brakes and sram shifters in one clamp. Printed in PETG with 4 perimeters and 30% infill. No supports needed.
This remix Works for Magura MT5 MT7 and also for Shimano Brakes Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Sport & Outdoors
I have more models available on my cult3d https://cults3d.com/es/modelo-3d/herramientas/3x-kit-for-working-with-brake-calipers-kit-3x-utiles-para-trabajo-con-pinzas-d page that increase the number of compatible brake models. Tool to…
Gedruckt in PETG mit 3 Rändern und 0,15mm (oder geringere) Schichthöhe. Keine Stützen erforderlich. Neu! Modell mit Schriftzug wie beim Original hinzugefügt.
brake lever clamp replacement for your Magura MT or HS kit. Uses the original bolts, fits perfectly and is WAY cheaper if you have the 3D printer anyway. I printed this in ASA with 100% infill and acetone smoothed it afterwards. Carefull…
Tool for magura mt7 and Gustav 4 piston brake calopers. Blocks 3 of the 4 pistons so that they can be moved one by one. Print on the side, no support PLA
This is a Magura MT5 brake lever clamp, same size as the original one.
ukraine sea drone magura
Lever for the MY 2010-2016 and it is not possible to get a spare part so i designed one. Print with PETG or better materials for heat resistance and strength. Print with 7 perimeter and about 50% infill. Print with the fillet on top and…
Magura MDRP Drinks coaster - made another but added as a remix as got the idea from original.
FAST PRINT I use it on my Magura MT5 Pro , but it should work with other brakes You can use this either for bleeding your magura brakes, or when traveling with uninstalled wheel It can be also used when you need to press pistons back ,…
Adds a bite point adjuster option to the levers of Magura MT7 brake systems. This allows adjustment of the amount of lever throw before the pads bite on the disc. Magura offers a BAT kit to try and do this but it doesn't really work and…
These two tools are meant to remove the piston covers from older Magura brake calipers such as the Magura Marta and Louise. they are adapters to a Hex key
Magura bore cap tool for Magura MT4 disc brake with 5mmx20mm screw
I think there is no specific mount aviable so i make one. Recommend a 0.12mm layer height with 5 wall thicknesses. PETG or ASA/ABS Required: 1x M5 threaded insert and 2x M4x10mm Bolts The threaded insert is melted from the underside. This…
I designed this prat for my Sram GX trigger and Magura MT5 brake lever, it may will work with other Magura brakes witch has the same clamp as the MT5 and I assume the Sram NX trigger is the same design so it may will work with that too.…
🇩🇪 Beschreibung Ich hatte immer Probleme die Bremsklötze von Magura Felgenbremsen in allen Dimensionen korrekt auszurichten (vermutlich eine Frage der Übung …) Mit dieser Lehre ist die Montage ziemlich einfach: Die beiden Schablonen…
Initial Situation & Development: The mount for the Supernova high beam switch doesn't provide enough counterpressure to turn the high beam on or off without twisting it. It was important to me that the adapter be positioned as close to my…
I printed this in black PLA. Glued the magnet in place and fixed this to the lever with 2 extra tiewraps. Should be easy printable.
I made this MTB Magura MT5, MT7 and MT-Trail brake caliper cover. Print it upside down - you don't have to use any supports thanks to that. I print 4 pieces in 1 print, for the front and back caliper - just copy 1 piece in PrusaSlicer and…
I wanted to tidy up my mountain bike cockpit. Unfortunately, the Magura adapters available for purchase aren't ergonomic for me. So I designed adapters with different angles.Depending on the angle of the brakes, you can choose an adapter…
Magura breaklever limitation pin for ALL Magura MT brakes. Its important that the pin is thick enought in the middle.
A spare brake pad set for your bike toolset. It's compatible with all Magura MT 2 caliper brakes. You'll need a Torx TX25 wrench to assemble/disassemble it, because you need the same tool to replace them on your brake. Prints without…
I had a problem with a poorly designed Magura Vyron 3 dropper lever battery cap that broke where the seal lies. So I made more robust model. I made two types of seals to choose probaly best to put both in I have both seals and it fits…
I wanted to tidy up my mountain bike cockpit. Unfortunately, the Magura adapters available for purchase aren't ergonomic for me. So I designed adapters with different angles. Depending on the angle of the brakes, you can choose an adapter…
I designed this spacer to fit the Magura MT2 (2020 model) hydraulic brake caliper. This tool blocks the piston on one side to allow the piston on the opposite side to extend out of the caliper so that it can be cleaned and lubricated.…
I made the Hymec work for the SXV. So I write here for others in the future who want to do this as well. 1. You need Magura Hymec 2100005 (this has a cylinder for 51-53mm working stroke). The SXV has 49mm and Magura says you should take…
bicycle brake handle
This mod only works with the MT5. I designed it after realizing that no one had made one before, and I didn't want to spend money on two expensive levers just to get the preload adjustment on my brake. This mod is designed for the…
Lost one of my cover plates in a crash. Snaps right in place. No supports needed
FAST PRINT I use it on my Magura MT5 Pro , but it should work with other brakes You can use this either for bleeding your magura brakes, or when traveling with uninstalled wheel It can be also used when you need to press pistons back ,…
I made this MTB Magura MT5, MT7 and MT-Trail brake caliper cover. Print it upside down - you don't have to use any supports thanks to that. I print 4 pieces in 1 print, for the front and back caliper - just copy 1 piece in PrusaSlicer and…
🇩🇪 Beschreibung Ich hatte immer Probleme die Bremsklötze von Magura Felgenbremsen in allen Dimensionen korrekt auszurichten (vermutlich eine Frage der Übung …) Mit dieser Lehre ist die Montage ziemlich einfach: Die beiden Schablonen…
I designed this spacer to fit the Magura MT2 (2020 model) hydraulic brake caliper. This tool blocks the piston on one side to allow the piston on the opposite side to extend out of the caliper so that it can be cleaned and lubricated.…
If you've lost the cover of your eLECT seat post remote (like my son :-)), this is the right spare part. Print it with PETG, 0.2 mm layer hight. The first layer must be 0.2 mm too. Glue the two parts together. Superglue seems to work.…
Simple clip for holding a Magura brake hose (5mm diameter) to a standard gear cable(4.1mm). Printed in PLA but could be printed in PETG or ABS as well. Print two and clip them on in opposite directions as shown in photo for a more secure…
One of my pictures shows a common part to fail on Magua levers. Is an ideal quick fix to have while waiting for a replacement to arrive. Or to colour code your set-up. I printed mine in PETG, Wall line count 3, 10% infill (you could go…
