Generic Damper for 3D Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU generic damper for any 3D Printer. It will reduce the vibration and noise produced greatly.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
My Elegoo Neptune 4 Pro was creating too much vibration on the table and even on the ground when printing at high speeds, so I decided to print a simple damper to absorb most of the vibration. The result is a simple parallelepiped created on Autodesk Fusion.
The size is 7 x 5 x 3 centimeters, but you can adjust to your needs. Less than 3 centimeters in height will absorb less vibration and more than 5 maybe is just overkill or worse, can become wobbly.
The trick is to print in TPU, 15% infill gyroid, 4 layers at base and top, 2 walls. I printed with 0.2mm layer on a 0.4mm extruder.
After printing four and putting under the stock leg, the noise was drastically reduced. Mostly of the noise was being generated by the printer's vibration, like a hand crank music box.
Simple idea required a simple design and it works.