Generic Damper for 3D Printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU generic damper for any 3D Printer. It will reduce the vibration and noise produced greatly.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 50
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
My Elegoo Neptune 4 Pro was creating too much vibration on the table and even on the ground when printing at high speeds, so I decided to print a simple damper to absorb most of the vibration. The result is a simple parallelepiped created on Autodesk Fusion.
The size is 7 x 5 x 3 centimeters, but you can adjust to your needs. Less than 3 centimeters in height will absorb less vibration and more than 5 maybe is just overkill or worse, can become wobbly.
The trick is to print in TPU, 15% infill gyroid, 4 layers at base and top, 2 walls. I printed with 0.2mm layer on a 0.4mm extruder.
After printing four and putting under the stock leg, the noise was drastically reduced. Mostly of the noise was being generated by the printer's vibration, like a hand crank music box.
Simple idea required a simple design and it works.