1 / 3
(Switched) Filament guide for Prusa MK4 #build123d — zdjęcie 1
1 / 3

(Switched) Filament guide for Prusa MK4 #build123d

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple frame mounted filament guide for the MK4 with the mounting system for best stability and pull-off effect

Ocena
5 / 5
Polubienia
12
Pobrania
102
Wydruki
4
Wyświetlenia
530
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Warning

IMPORTANT:

Using the switched fillament guide with very high models crashes the extruder!

Please be aware of that! 

I am planning to update the model as soon as possible to remove this issue.

 

Motivation

After my original and reprinted filament guide broke I was searching for a better filament guide which could endure more force in the case of a filament knot. https://forum.prusa3d.com/forum/english-forum-original-prusa-i3-mk4-hardware-firmware-and-software-help/filament-guide-broken-twice

I found and made the great model here with a short arm that is directly mounted on the frame similar to the filament holder (see https://www.printables.com/model/517659-filament-guide-for-prusa-mk4/comments/1584025).

After installation I found that a modification of the holder orientation would give even more stability, though reality proofed my wrong the knot in the filament will apply a force that pulls my switched version of the frame. 

IMPORTANT:

The guide will NOT be damaged though. 

 

Creation 

So I used my Code-CAD tool ([build123d]https://build123d.readthedocs.io) to cut the model in half and turn the foot 180 degrees.

There is another model that does a similar thing but only rotating it 90 degrees.
I hope this gives everybody a quick and easy choice of the best use-case.
 

You can use the model file 789198a-filament-guide-MK4.py to experiment with the angle

Printing

  • I used the Prusa PLA Galaxy Black to match my other printer parts.
  • I added autogenerated lightning supports (see screenshot in make)
  • Printing took around an hour. 
  • Installation is easy - you can reuse the PFTE insets from the original filament guide or a tube with reverse bowden

 

Random Douglas Adam Quote

The Vogon demolition ships hang in the sky exactly like bricks  don't.

 

Tagi