(Switched) Filament guide for Prusa MK4 #build123d
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple frame mounted filament guide for the MK4 with the mounting system for best stability and pull-off effect
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 102
- Makes
- 4
- Views
- 530
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Warning
IMPORTANT:
Using the switched fillament guide with very high models crashes the extruder!
Please be aware of that!
I am planning to update the model as soon as possible to remove this issue.
Motivation
After my original and reprinted filament guide broke I was searching for a better filament guide which could endure more force in the case of a filament knot. https://forum.prusa3d.com/forum/english-forum-original-prusa-i3-mk4-hardware-firmware-and-software-help/filament-guide-broken-twice
I found and made the great model here with a short arm that is directly mounted on the frame similar to the filament holder (see https://www.printables.com/model/517659-filament-guide-for-prusa-mk4/comments/1584025).
After installation I found that a modification of the holder orientation would give even more stability, though reality proofed my wrong the knot in the filament will apply a force that pulls my switched version of the frame.
IMPORTANT:
The guide will NOT be damaged though.
Creation
So I used my Code-CAD tool ([build123d]https://build123d.readthedocs.io) to cut the model in half and turn the foot 180 degrees.
There is another model that does a similar thing but only rotating it 90 degrees.
I hope this gives everybody a quick and easy choice of the best use-case.
You can use the model file 789198a-filament-guide-MK4.py to experiment with the angle
Printing
- I used the Prusa PLA Galaxy Black to match my other printer parts.
- I added autogenerated lightning supports (see screenshot in make)
- Printing took around an hour.
- Installation is easy - you can reuse the PFTE insets from the original filament guide or a tube with reverse bowden
Random Douglas Adam Quote
The Vogon demolition ships hang in the sky exactly like bricks don't.