Gadsden Flag Magnet- Dont Tread On Me Snake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Patriotic flag designed during the American Revolution turned into a refrigerator magnet using three 6x3 magnets.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 178
- Wydruki
- 1
- Wyświetlenia
- 597
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Summary:
Gadsden Flag themed magnet with no MMU/AMS needed for multiple colors, simply pause on layers to change filament. Magnet measures 3"x2.67" (76mmx68mm) WxH.
Print settings:
PLA, 0.4 nozzle, 0.2 layers, 2 walls, 10% gyroid infill, classic wall, detect thin walls turned on, optional ironing. I also prefer a smooth build plate for magnets.
Magnets:
Designed for three 6x3 magnets. My magnets actual measurement was 6.0mmx2.5mm so the magnet hole is 6.3x3.0. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print.
Filament changes:
Color order for filament changes: yellow, green, black
If you stick with 0.2 layer heights:
- Layer 18 insert magnets
- Layer 21 change from yellow to green
- Layer 24 change from green to black
*Be sure to double check your slicer for layer pauses