Gadsden Flag Magnet- Dont Tread On Me Snake
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Patriotic flag designed during the American Revolution turned into a refrigerator magnet using three 6x3 magnets.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 178
- Makes
- 1
- Views
- 595
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Summary:
Gadsden Flag themed magnet with no MMU/AMS needed for multiple colors, simply pause on layers to change filament. Magnet measures 3"x2.67" (76mmx68mm) WxH.
Print settings:
PLA, 0.4 nozzle, 0.2 layers, 2 walls, 10% gyroid infill, classic wall, detect thin walls turned on, optional ironing. I also prefer a smooth build plate for magnets.
Magnets:
Designed for three 6x3 magnets. My magnets actual measurement was 6.0mmx2.5mm so the magnet hole is 6.3x3.0. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print.
Filament changes:
Color order for filament changes: yellow, green, black
If you stick with 0.2 layer heights:
- Layer 18 insert magnets
- Layer 21 change from yellow to green
- Layer 24 change from green to black
*Be sure to double check your slicer for layer pauses