Stylus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,77 € – 0,94 € netto (bez VAT)
Dla pliku: stylus_0.4n_0.15mm_PLA_MK4IS_59m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,85 € netto (środek widełek).
- Masa podana przez autora
- 8 g
- Czas druku podany przez autora
- 58,8 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Stylus pro školní interaktivní tabuli Promethean. Glue all parts together.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 614
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stylus for school interactive board/panel Promethean. Just glue all parts together. Central hexagonal part is for not rolling of the table. Smooth ends with fire so it will not scratch the board. You can print stylus stand. Screw is really tight (and it is good thing) so be patient when installing it. If it is too long, just pinch it out witch pincers, put glue in the hole and screw it together. It is ideal for small hands of kids unlike original thick stylus. I printed it with 100% infill.
