Stylus
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.77 – €0.94 net (excluding VAT)
For file: stylus_0.4n_0.15mm_PLA_MK4IS_59m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.85 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 58.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stylus pro školní interaktivní tabuli Promethean. Glue all parts together.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 54
- Makes
- 0
- Views
- 614
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stylus for school interactive board/panel Promethean. Just glue all parts together. Central hexagonal part is for not rolling of the table. Smooth ends with fire so it will not scratch the board. You can print stylus stand. Screw is really tight (and it is good thing) so be patient when installing it. If it is too long, just pinch it out witch pincers, put glue in the hole and screw it together. It is ideal for small hands of kids unlike original thick stylus. I printed it with 100% infill.
