1,263 models
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter. Simple to print, easy to install, and has helped to improve my Quality Of Life. IMPORTANT Please read the instruction guide below. I do my best to…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
Print approx. €1.35–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
ENGLISH Cigarette holder with activated carbon filter If you like it, leave a like please Length: 80.5mm Diameter: 13.6mm Version 1: Suitable for cigarettes with a diameter of 7.6mm to 8.5mm (v1) Version 2: holder cigarette v2 6,6-8,4mm…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Parts required: 4x m2.5x12mm screws 4x m2.5 nuts While slicing, I used supports for the SD card slot and the screw holes but it's possible they may not all need supports. After printing, poke holes through the thin top layer that is…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Radioactive Nuclear symbol Fallout. Diameter : 98 mm. 1 mm for the yellow part, 1 mm for the black part.
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
useful for any occasion
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
The 3D-printed interactive digestive system model is an innovative educational tool that allows you to explore the digestive process in a visual and hands-on way. It is designed to accurately represent the main organs of the digestive…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
2 piece "Radioacive Spiders" warning sign. Both Models have the GCode with a Filament colour change at the appropriate layer. If you desire to print from the .STL's (for those who print in PLA), in Prusa Slicer Follow the instructions:…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for PETGSource material: PET
Parents and pre-schools will welcome this replacement part. If you have activity tables from brand Step2 (Little Tykes) and have lost the little car bridge parts over time, this print gives you a way to make your activity table as good as…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
You'll only need 4 M2.5x5 screws to attach the raspberry pi to the cover. The fan is 40x40x10mm ideally with a USB. CPU stays very Cool. 35C during 100% CPU usage. To join the top and bottom of the cover, use 3 M3x25 screws ISO 7991. You…
Print approx. €5.05–€6.17 excl. taxPreliminary estimate for PETGSource material: PET
Please like and follow and post your makes Amateur Radio Active sign. Size up or down as needed. Print with color changes starting with Yellow / Black / Red at appropriate layer levels to achieve the result as pictured.
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for one variant
Big Pit Love is not a remix of Pit Love. They are opposites! In Pit Love, the Pit Bull comes out of charm and is altogether not as sturdy. This is perfect! Original file is an svg used for CNC router, it makes sense it works out in…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Indicator designed for multi material printing. The black center is 0,2mm higher than the rest of the indicator and has a 8mm diameter. Use this to align and glue the magnet to the indicator. The downward face will be the side you look at…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
A Version of the Sonos Active Case ( https://www.thingiverse.com/thing:4858266 ) with a space to insert MagSafe Magnets during the print. This then allows the Apple MagSafe charger to align and attach to the case to charge the Sonos Roam.…
Print approx. €7.11–€8.69 excl. taxPreliminary estimate for PETGSource material: PET
Music reactive LED helmet - non wearable version I really like the german band DEICHKIND which I listen to since the late 1990s. Their shows are legendary epic as f**k. I have not seen any better show yet. (Props for the message at minute…
Print approx. €3.99–€4.88 excl. taxPreliminary estimate for one variant
I now have a growing number of printers and have growing concern about particulate microplastics and VoCs from printing with various polymers in my printing space. So, I wanted a reasonably quiet, always-on air filter. I selected some…
Print approx. €1.63–€2.00 excl. taxPreliminary estimate for one variant
I use this model every day for my Samsung Galaxy watch Aktive 2. Just the charging pad was to loss in my opinion so I designed this stand. You have a plain back to use different types to fix it to the wall. Share with me all you feedback…
Print approx. €2.21–€2.71 excl. taxPreliminary estimate for PETGSource material: PET
This is a mounting bracket designed to be used with StanleyB 's Internal active air filter . Once mounted, the air filter slides into place for easy removal to change the filter or replace parts.
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Whipped up this 3rd entry to my meagerly popular deciding dice series. This one has 12 sides, each with one or a few options/ideas for a date or activity with friends. The sides are: Movie/TV + fun snack ( netflix + chill's puritan…
Print approx. €3.40–€4.15 excl. taxPreliminary estimate for one variant
This is a road interactive road board for mockups (with LCD 2x16). It is easy to install with 4 screws. In my mockup it is connected to Arduino uno R3 with a temperature sensor. dimensions: 9,5cm x 11cm x 2cm
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for one variant
Here's a compact case that holds an Eleclab 7" touch screen Revision C. Since that screen is also a RPI add on, it also holds the raspberry Pi. The case and case back should be printed separately. Use snug supports to print the case, they…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Behaviour Interactive textured logo
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
I couldn't find one so I made my own. added an mmu version
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Ultimate Smart Interactive Cat Toy Replacement Yoke. These toys are great and cats love them, but the stock yoke on the toy breaks easily. This fixes the week spot
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Some clips for ski or bicycle helmet
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
Model revisited in 2026: new universal print profile simplified instructions improved gear identification Have this mesmerizing print as a novelty decoration and a conversation piece. No glue or extra parts needed. Printing settings This…
This is a refillable alternative to the original activated carbon filter by Bambu Lab. Just fill the box with activated carbon (I bought mine here: https://amzn.to/3lYflF9) , and you are ready for another 60 days of printing. As shown in…
Hello! Thanks so much for being here! This project was a long time coming. I've been wanting to design a 3D printed BMO since before I started in the hobby. I poured a lot of time and effort into this project, and I'm so stoked for people…
A laptop stand that doubles as a vertical laptop holder. Rubber feet can be added to increase stability. The size of each stand is 22.6 cm long, 3.5 cm thick, and 7.9 cm tall. If you enjoyed this model, check out my Cults page to discover…
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Python I've teamed up with a few different stores around the world offering the…
Creality K1 - Hepa filter housing This design has been created to place a hepa filter on our Creality K1 printer using Xiaomi washable hepa filters Other mods for Creality K1 You can buy me a coffee with a donation. Me puedes invitar a un…
Interactive Gear Board is a versatile, interactive building platform designed for limitless creativity and hands-on learning. The board features a modular grid with snap-in connectors for gears, rails, and other components, allowing users…
Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…
need any suport infill 20% link chain bellow: https://www.printables.com/model/695436-ender-3-v3-se-spine-cable-chain
Radioactive Keycap printed with black and yellow
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT First Release version available! Parts updated to improve fit & function as well as to allow the USB C connector to be used without modification. Also I've added…
Simple signs, two color print without MMU (color changes between different layers). PLA.
General I was unable to find a refillable activated carbon air filter (box) for Bambu Lab X1 / X1C / P1P so I rolled up my sleeves and designed my own version. Features Allows to save a decent amount of money using this instead of the…
This is a knob for the Ender 3 V3 SE with a radioactive logo (ofcourse). It slides over the original knob, so you don't have to remove the original. Update 21-06-2025: The old version had a weird artifact on the walls so i redesigned it.…
Quest 3 Controllers - Sports / Active Strap Mod This is my mod to reuse my 14mm wide velcro straps (from my quest 2), it'll fit anything up to that (10mm on aliexpress recommended if you don't have the ones from the aftermarket quest 2…
A perfect day in Printer Island is about the be ruined by an eruption of Mount PLA! https://www.youtube.com/watch?v=3cVqtMMg_AE This thing is a volcano, which uses an LED illuminated ultrasonic mist generator to bring it alive. Assembly…
My 2nd design for my Raspberry Pi 5's (with the official Active Cooler), designed on my Pi 5 using Freecad / LibreCAD. This design keeps the micro-SD card safe inside the case boundaries and provides enough ventilation to keep the temps…
I wanted to use the carbon pellets I had for the BentoBox v2 for the internal carbon filter and saw @TechwithKramer's model, but the model took almost 3-4 minutes just to slice in Orcaslicer/Bambu Studio and a staggering 2 hours+ to print…
This is a charging stand for the Garmin Vivoactive 4. Simply insert the original cable from the bottem and secure it in the slot. The part prints without supports. With the 0.3mm Draft profile on an MK3 it will take less than an hour.…
A relatively simply print. If you can print Lucky 13, then FIDO should be easy. Use the same print settings as Lucky 13 – 0.15 layers, no brim or supports, and a 0.15mm elephant foot adjustment. PETG is best. Should take an hour or two to…
A real eye-catcher in any room! I split the print into two elements to make it two-colored. The parts are simply stuck together. I recommend using glow-in-the-dark filament for the "liquid" to achieve the great effect. Inner diameter: 14…
UPDATES 2022-12-02 Released DRIP_TIP_V2 ; it really makes it easier to push air through, IMO. Print with threads facing up. Removed historical files. No one should be using those anyways. 2022-01-20 Released EXT_CHAMBER RC2 2022-01-19…
A bookmark I designed to match the book I'm currently reading - "Every tool's a hammer" by Adam Savage. I printed this with Mango Yellow Prusament PETG, which really matches the color of the book sleeve nicely :) If you print this with…
Always been a fan of the radioactivity sign, so now that i finally have my own 3D printer i couldn't resist to make my own extruder indicator! Compliment it with: 40x40 Fan Cover Radioactive/honeycomb…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
To make our printing a little safer, I designed this small box to house a HEPA filter + activated carbon, fully integrated into our printer, easy to make and economical. The following materials are needed: 1 unit - Active Carbon filter 1…
Vento is a refillable activated carbon/ HEPA filter mod designed for the Prusa Core One. Simple to print, easy to install. It uses magnets and self-align to the exhaust fan opening with the help of m3 screws attached to the rear panel of…
Remix of Uncle Jessy's Hepa filter design that supports carbon filters. Current versions: Remix design 1: - Taller mount/tray to fit a 1cm (10mm) carbon filter behind the Hepa filter in the same tray. To print this version, download all…
Kids Workspace - Screwboard for Desk and Wall Designed for the next Maker Generation! 👦👧 A very nice toy for child's where they could practice to use different tools for different screws. Use the included mount for the wall, you can…
Left and right are available: Please note : I might not be able to keep the files here up to date at all times. It's better to get them from the Git repo . I've been a maker and board member of the French e-Nable association for a few…
I used this activ carbon: https://www.amazon.de/gp/product/B095PZLXPQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 You have to watch out that your active carbon is a least Ø3mm otherwise it will fall out of the box.
My kids really enjoyed the VR game ‘Waltz of the Wizard’ by Aldin Software. It features a character called Skully with whom you can interact with and generally be unkindly towards. I had already finished a project by Joran to recreate one…
Hey! This is Garmin Vivoactive 3 Smartwatch / Sportwatch holder for your bike. It allows you to mount Smartwatch on the handlebars with aid of 2 zip-ties. Smartwatch is strapped on the holder the same way as it's on the hand. It provides…
Cases for the Typeractive versions of the Corne, Corne 5 column, and the Lily58. Straight from typeractive.xyz. I just exported it using Blender. All rights to Typeractive.
The original QIDI activated carbon box keep a lot of space where the heat from the internal chamber will enter to electronics chamber… with this mod we reduce this negative air flow and increase the amount of activated carbon to filter air.
Hello Makers, i wanted a bigger LED matrix with 32x32 LEDs. So i looked for a nice picture frame that fits also for the depth. I found a good & cheap one on IKEA. On Youtube there are lots of tutorials to build a 32x32 matrix out of four…
Xiaomi Smart Band 8 Active charging stand. There is a cable channel to tuck the cable into, with everything press-fits into the stand. You might need to use a vise or a pair of pliers to set the charger into the hole. I found printing on…
I've seen quite a few ESP32 boxes out there, and even some that can accommodate a speaker for running WLED SR (Sound Reactive), but i wanted a box with a little bit more room. I made this container/enclosure for those that want a little…
Hello! This is a nice add-on for your 3D printer enclosure. This files contains parts needed to build wall/panel-mount HEPA + active carbon filter. It's designed to fit 120x120x25mm (standard 120mm) fan. Improve air quality on exhaust…
The HEPA filter used is for Roidmi F8Pro, search in your local online store. I don't include links since they may expire. Price for the filter varies in different locations, the ones I got is roughly $1 USD/piece. Actually there's still…
Activated carbon filter to remove odors from your 3D printer, works with FDM and resin. The printer needs to be enclosed as is small and does not have the capacity to filter an entire room. Requirements 1. You need to print one box (you…
Update: 2023 Feb.28 I uploaded pair of ACF exhaust blocker. Since it's nearly impossible to make a bag of activated charcoal as a really square brick, and it'll leak by the two sides. Adding these blockers should make leaking to minimum.…
The Polestar 2 Activity Key is designed to be disposable. However, if you do not want to throw it away and buy a replacement when the sealed battery runs out (~2 years), it is possible to extract the key electronics, replace the battery…
Got a new watch and needed a simply stand for it. Fits the charger (EP-OR825) snuggly. STEP file included. Print instructions Made for FDM/FFF printing, so doesn't need any supports. Print sideways and use 0.1 or 0.2 layer height.
Použití např. na domácí activity board pro vaše dítě
Ender 3, V2, S1/S1 Pro Sprite Extruder Activity Like other models I printed this in ABS, which shrinks a little for a snug fit, If printing in PLA or perhaps PETG you may want to print at 98%
Version v1.1: changes of the wall thickness Holder would be putted directly on the screws of the Heatsink. fan Noctua A4x20 would fixed with 4 M3x20 screws One Metallholder in the housing have to be bended
K1 Max Extruder Active Cooling to stop Clogs Uses a 4010 Blower Cooling Fan (Same as the ones for the 2 part cooler fans in the Ender 7). I connected the Fan to the connector of the Back Chamber Fan because for PETG I never have to use…
This is s remix of DalbyTech's Garmin Fenix5 watch charging stand. I wanted a charging stand for my Vivoactive 3 and just added a charge cable hole to the 12 o'clock position for the charging cable using Tinkercad. Print instructions…
Required parts: 2 x filter_body_cap.stl 1 x filter_body.stl 1 x filter_holder.stl Additional items: cylindrical activated carbon, fine mesh. Optional parts: mesh_stencil.stl - for mesh chopping Slicer parameters: Support: No Infill: 15%…
This is what you've been looking for on all the 3D parts forums. You just want a better funnel when changing the oil in your Skyactiv engine on your Mazda 3 because standard funnels don't stand still. For some reason, Mazda thought it was…
Based on my charging stand for Epix watches, I made this modification for Vivoactive 5 wich fits the original charging cable (slightly pressed in) - please check attached model dimensions to verify you have the same plug on the end……
Remove harmful fumes and VOC from the air to keep you, your family and your pets safe. This mod uses proven HEPA and activated carbon filters with powerful 5015 radial fans to achieve a 5.5x improved filtration over the axial version!…
The Garmin Vivoactive 4S smartwatch is smaller than version 4 and the original stand didn't fit my needs. Patrick was so kind to publish his original model as step file, so I was able to resize and redesign it a bit to fit 4S version. The…
The goal here was to design a way to add an activate carbon filter to K1 exhaust fan. I've researched for an specific filter for this application, and found that Anycubic has one for this specific use. So, it was designed to use this…
Update 18Sept'24 : new lid design with the GPIO break-out increased in size so that a 40pin cable with its connectors can easily fit thru the slot. Although somewhat based upon a previous Raspberry Pi 5 snap-fit model (see here ) this new…
A Xiaomi Redmi Watch 3 Active Stand, I chose an octagonal joint for the upper part so you have more “degrees of movement" when you want to change the angle while still keeping a good printability, it's support free so you only need a…
Just another Extruder Rotation Visualizer "Radioactive" Follow the Instructions here: https://blog.prusaprinters.org/visualize-extruder-motor-movements_7392/
**UPDATE: Although very tight at first, the filter seems to loosen and can fall off over time due to the K1 back ribs flexing outward. Recommend using doubleside tape or similar adhesive to keep filer plugged on the K1 (6/12/2024)…
Printable activity board parts which I created for my kids to play with. Printed by PETG, 10% infil, easy job. Works well and kids enjoy it. For securing parts to the base board, use screw M3x15mm. Thx hollac
This is the best of both worlds from two very good models. The combination of the two creates an exceptional Activated Carbon Filter for the X1C that can be filled with carbon pellets to filter out Volatile organic compounds (VOCs) from…
I designed it for my garmin vivoactive 3 with closed strap, and my wife's forerunner 45s. v1.4 - only for vivoactive 3. v2.2 - for VA3 and FR45s and maybe else. v3.0 - slim version - not yet printed for VA3 and FR45s and maybe else.…
Protective case with printable inserts for either the Accu-Chek Instant or Accu-chek Active blood glucose meter. The insert has space for the glucose meter, lance and test strips. The Instant insert also has space for spare lances. There…
I re-upload the model from Thingiverse as I've used it for my server rack based enclosure for the MK4, and it does its job very well. Full credits to the original author. Summary Deutsch siehe unten :) This is a housing for using…
Puzzle #1 - Tangrams Tangrams are puzzles where you try to fit all the pieces into the required shape. I printed the game pieces for my tangram in red. Puzzle #2 - 15 Puzzle The 15 puzzle is a 4x4 grid of sliding tiles with one spot open.…
https://snactiv.com/ I am in no way affiliated with Snactiv. These designs were made by me with the help of reference images. The chopstick should be printed in a solid material where the inserts should be printed in a flexible one.
Another Air purifier which should be used with some additional active carbon It can be used in 2 ways: Print only upper part, insert 6x3mm magnets and snap it on exisitng filtration fan Print everything and make a closed loop ventilation…
Simple 2 piece case to hold Active Carbon combined with a spacer to allow HEPA filter as well. Made for AD5X, but should also fit AD5M and AD5M Pro. This is a Remix/combination of two active carbon filter boxes. I liked the Top &Bottom…
DANGER RADIOACTIVE LANGUAGE - F-BOMB TEST RANGE SIGN Category: Signs & Logos
This is a remix of @Joshckb_190777 's excellent Lily58 case adapted to fit the Typeractive.xyz Lily58 Choc kit, which uses a more-compact switch spacing than the original Lily58 board. This only fits the Typeractive version of this board…
A simple interactive steering wheel for toddlers. Printable without supports. Fittable to popular BabyBjorn bouncer. Assembly with superglue, paintable with toy-safe acrylic paints (european standard EN 71-3) As safety cannot be…
This is designed to activator the manual filament cutter and mount the switch for the 3dChameleon. It can also be used to activate the manual cutter using gcode and not use the 3dChameleon. Orca Slicer Setup Click on the printer settings…
This is a version with a switch limit and a large area horizontal structure, unlike a hole, to reduce wind resistance. Use 1 cm diameter adhesive tape as a pull ring
![2 in 1 Laptop Stand [active mode & storage mode]](https://media.printables.com/media/prints/38bb2bf4-4166-407d-8424-82db8ca54e34/images/13529213_07e5c11d-d7b0-46ae-a8f5-861b9455e47c_7c3e2482-0d49-4bf7-9a9d-a072cbd14887/laptop-stand-poster-1.jpg)
