IKEA Mosslanda Shelf for Nintento Switch game boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable shelf insert to put Nintendo Switch game boxes onto an IKEA Mosslanda shelf.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Customizable shelf insert to put Nintendo Switch game boxes onto an IKEA Mosslanda shelf.
Set either the maximum length of the shelf insert (e.g. based on your print bed size) and let the scad file calculate the number of game box places it could fit in there.
Or set the override_num_places to define the precise number of places you want (this will ignore the maximum length, so make sure this will fit on your printer!)
You can print multiple sections with all but the last section having do_end_wall=0 and then glue those sections together for MAXIMUM GAME SPACE!
In the pictures I printed two sections: one without the right-side separator wall, the other with a right-side separator. I glued them together with boring old Pattex Alleskleber.
To reduce filament usage the insert is hollow and supported by regularly placed support beams/legs. Set max_bridge_length to adjust the distance between those supports. Since no one will see the underside of the insert, a relatively long bridge distance will do.
The pre-generated STL files have 8 game box places each, for 16 places in total if glued together.