Zipper Pull - Sally (LINE Friends)

Items you need:

• 2 x “4mm x 30cm” paracord.

• *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).

• Super glue (for components and magnets).

*If you do not have magnets, I have included a 3D printed option - Connector.

Suggested print settings for the Main Body:

• Layer height 0.2mm.

• Infill 30%.

• Position the print in a way that the joining face is facing downwards.

• No supports are needed.

Suggested print settings for Eyes:

• Layer height 0.2mm.

• Infill 15%.

• Brim (needed if bed adhesion is insufficient).

• Position the print in a way that the chamfered face is facing upwards.

• No supports are needed.

Suggested print settings for Mouth:

• Layer height 0.2mm.

• Infill 15%.

• Brim (needed if bed adhesion is insufficient).

• Position the mouth on its side.

• No supports are needed.

Assembly

Note: This print contains small components. Tweezers may be needed for assembly.

Attach the chamfered sides of the parts to the main body. For the eyes, ensure the smoother side (the side facing the print bed) faces outward.

V2 Mouth: The mouth is now a single piece. Fits either of the main body pieces.

Changelog

• 14 Oct 2026: Version 2 - One-piece mouth design.

For more interesting zipper pull charms, be sure to track this tag (Zipperrific).

We've even conjured up a little home for our zipper pulls – because they deserve a stylish rest when they're not out and about with you! And to top it off, each zipper pull features a sneaky slit perfect for showcasing photos, name cards, and more. They're not just zipper pulls; they're your new tiny, table-top pals! 🌟