1 / 1
Voron 2.4 GX16 Connector Skirt Panel — zdjęcie 1

Voron 2.4 GX16 Connector Skirt Panel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adds a spot to put a GX16 aviation connector on the rear skirt.

Ocena
0 / 5
Polubienia
7
Pobrania
21
Wydruki
0
Wyświetlenia
462
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Wanted a clean look to my ERCF install, so I modified a voron skirt panel to accept a GX16 aviation plug to pass my 24V/CAN cable to the BTT MMB.

Connectors I used (Should work with any GX16 sized plug.)

Can be printed in any material as this is outside the enclosure but ABS is still recommended.

Follow Voron standard print guidelines:
4 walls, 5 top/bottom, 0.2mm layer height, 40% infill

 

TinkerCAD Source for remixes

Tagi