1 / 2
Mercury zero G / Voron Triendra Din Rail 35x15 Extrusion mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard din rail mount on extrusion are made for 35x7,5mm din rail this make possibility to use 35x15mm din rail
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (10)Powiązane
I had 2 35x15mm rails but original mercury zero g are made for 35x7,5mm rails so i had an idea to make it usable with 35x15mm din rails,
It is perfect with mercury zero g skirts and could be mounted for others printers but it remain untested.
You need to move it down your slicer 2,3mm in order to cut strange cube on model
Printed using PolyMaker Polylite ABS 40% Infill
Ender 3 S1 Pro
