1 / 4
Creality K1/K1C Left Side Filament Tube Guide System
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guide feeding PTFE tube to the left of Creality K1/K1C printers
- Ocena
- 5 / 5
- Polubienia
- 117
- Pobrania
- 648
- Wydruki
- 1
- Wyświetlenia
- 4565
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (200)Powiązane
Basic Bowden tube guiding system designed for filament feeding from the left side of the Creality K1/K1C printer.
Required components:
- 2 pieces of M3x8mm screws (4 if u have K1)
- 2 Quick Fitting Connectors (M6/M10)
Reuse the two tiny black screws that were originally in place (substituted with M3x8 screws to secure “Corner.stl”).Use them to fasten the "BackClip_K1C.stl" securely in position.
I own K1C, K1 does not have same holes of K1C so i designed “BackClip_K1.stl”. It is designed to fit in the same but opposite spot as “Corner.stl” (2 more of M3x8mm screws are needed)