1 / 4
Creality K1/K1C Left Side Filament Tube Guide System — image 1
1 / 4

Creality K1/K1C Left Side Filament Tube Guide System

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Guide feeding PTFE tube to the left of Creality K1/K1C printers

Rating
5 / 5
Likes
117
Downloads
651
Makes
1
Views
4,574
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Basic Bowden tube guiding system designed for filament feeding from the left side of the Creality K1/K1C printer.

Required components:

  • 2 pieces of M3x8mm screws (4 if u have K1)
  • 2 Quick Fitting Connectors (M6/M10)

Reuse the two tiny black screws that were originally in place (substituted with M3x8 screws to secure “Corner.stl”).Use them to fasten the "BackClip_K1C.stl" securely in position.

I own K1C, K1 does not have same holes of K1C so i designed “BackClip_K1.stl”. It is designed to fit in the same but opposite spot as “Corner.stl” (2 more of M3x8mm screws are needed)

Tags