1 / 2
Upgraded slider for Dracula's Tower Puzzle Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This new slider inserts the magnets in a way that improves the smoothness of the mechanism
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 314
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a new slider for Dracula's Tower Puzzle Box that has the magnet insertion at the rear to provide a flat gliding surface across the base.
You can see both versions in the picture.
Printing instructions
- Print the .stl file as-oriented.
- A brim might help.
Installation instructions
- Check the magnet orientation first!
- Push the magnets in from the rear of the slide into the two openings.
- It should be a tight squeeze, but you can optionally add a drop of glue in the opening end to keep it from moving.
Other notes
- If you haven't glued the magnets in yet, you can use a small pry tool from the screw hole to push them out.