1 / 2
Upgraded slider for Dracula's Tower Puzzle Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This new slider inserts the magnets in a way that improves the smoothness of the mechanism
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 52
- Makes
- 1
- Views
- 314
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a new slider for Dracula's Tower Puzzle Box that has the magnet insertion at the rear to provide a flat gliding surface across the base.
You can see both versions in the picture.
Printing instructions
- Print the .stl file as-oriented.
- A brim might help.
Installation instructions
- Check the magnet orientation first!
- Push the magnets in from the rear of the slide into the two openings.
- It should be a tight squeeze, but you can optionally add a drop of glue in the opening end to keep it from moving.
Other notes
- If you haven't glued the magnets in yet, you can use a small pry tool from the screw hole to push them out.