ToiletTron2000 Miniature Blower Duct for Geeetech Mizar Series printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A novel but not great ring-style miniature cooler for the Mizar S. Provides 360-degree cooling, requires no mods.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
(Original design from here: https://cults3d.com/:1323209)
This is a re-work of the “Creality Ender 3/3Pro Part Cooling Fan Duct” by KingYS
Significant effort was made to re-shape this and rework the mount to be compatible with the Mizar S while avoiding geometry errors during the process and while maintaining the same level of airflow (read: it sucks as of v1.0 lol).
Yeah I wouldn't recommend this over the stock blower - again not as of v1.0, but you may wish to modify this to your liking. I intend on investigating the design to see if significant improvements could be made without compromising the compatibility with the stock hotend shroud.
No supports required. I used 10% Gyroid infill, and used Overture PETG though I'm sure PLA would be fine. Uses the original Mizar S screws, so no extra hardware needed.
Super good upside: v1.0 uses a whopping 5 grams of plastic. It's basically free apart from the 30 minutes of print time you'll waste printing this thing.