90x90mm Board Game Magnetic Token Trays/Boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These boxes are to organize and store game pieces. Uses 6mm x 3mm magents.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
These boxes aren't for any specific game, but I thought someone might like them, so I modeled some.
Each model is named by their outer dimensions, followed by whether they are a bottom (B) or a middle (M) tray, and then the number of sections in that tray. The middle Trays have holes in the bottom for magnets, so you can have several stacked with a lid on top.
Each section of each tray is the same size except on the trays with 3 sections, where one section is twice the size of the other two.
The magnets are measured to be 6mm x 3mm. The holes in the model are 6.1mm diameter, I find this to be a good fit. I don't need to scrape away any material to fit the magnets in, but there is no need for adhesives either. Depending on your printer's tolerances, you may have to force it a little, or use adhesive, but this works great for me.
I also made the holes on top 3.2mm deep, but for holes on the bottom of the lid and top tray I made them 3.3mm deep (to compensate for the slight droop from the bridge. This is so the magnets can fit flush with the surface.
I got my magnets here: https://www.amazon.com/dp/B07873ZCY4?psc=1&ref=ppx_yo2ov_dt_b_product_details