90x90mm Board Game Magnetic Token Trays/Boxes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These boxes are to organize and store game pieces. Uses 6mm x 3mm magents.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 56
- Makes
- 0
- Views
- 438
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
These boxes aren't for any specific game, but I thought someone might like them, so I modeled some.
Each model is named by their outer dimensions, followed by whether they are a bottom (B) or a middle (M) tray, and then the number of sections in that tray. The middle Trays have holes in the bottom for magnets, so you can have several stacked with a lid on top.
Each section of each tray is the same size except on the trays with 3 sections, where one section is twice the size of the other two.
The magnets are measured to be 6mm x 3mm. The holes in the model are 6.1mm diameter, I find this to be a good fit. I don't need to scrape away any material to fit the magnets in, but there is no need for adhesives either. Depending on your printer's tolerances, you may have to force it a little, or use adhesive, but this works great for me.
I also made the holes on top 3.2mm deep, but for holes on the bottom of the lid and top tray I made them 3.3mm deep (to compensate for the slight droop from the bridge. This is so the magnets can fit flush with the surface.
I got my magnets here: https://www.amazon.com/dp/B07873ZCY4?psc=1&ref=ppx_yo2ov_dt_b_product_details