Skadis desk mount

I made this mount for the Ikea Skådis so all worktabels can mount them directly to the table. This is a very nice option if you have an electronic height-adjustable table, or dont have any walls around you.

Uses only things that are already in the skådis kits:
4 bolts
1 metal bar

2 of the bolts are used to secure the mount to the table from underneath. Use the endcap at the end of the screws to prevent damage to your table.

The second 2 are going in the front and through the skådis board, and locks in the metal bar. Use the wedge between the mount and the bar (this is done so almost all printers can print this kit)

Use something like electrical tape between the table and the mount to prevent slipping. 
There are 3 different table sizes atm: 12mm, 18mm, or 22mm. If you need anything else please write a comment.

I have found out that there is a slight difference in the metal bars, so if the screws cannot go through the mount and into the bar please let me know. Then I will update the design.

You can also buy the design here and support my work: https://cults3d.com/en/3d-model/tool/ikea-skadis-desk-mount

3D printing settings

Printed in PLA+ but I recommend using PETG or something stronger. Print with 40-60% infill and use 5+ walls to make it stronger. Print on the side to not use support.

This is currently in BETA mode

• 15-01-24: Uploaded the design: V1.0
• 02-04-24: Updated the base to fit more metal bars
• 29-5-24: Uploaded a 40mm version, and one with a thicker back

Support my work - By buying me a cup of Coffee☕

If you wish to print and sell the model, please contact me before you do so.