3D EDGE Creality Sprite Extruder Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgraded 3d printed housing for Creality Sprite extruder. Highly recommended with upgraded extrusion gears from Fysetc.
- Ocena
- 5 / 5
- Polubienia
- 69
- Pobrania
- 295
- Wydruki
- 0
- Wyświetlenia
- 2127
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Attention: This model is NOT compatible with stock extrusion gears
BOM:
Filament recomendations:
PP, PA, ABS with glass of carbon fiber
Print settings:
Line width: 0.4 mm
Layer height: 0.16 mm
Perimeters: 5
Tops and bottoms: 8
Infill: doesn't matter
Support: custiom only for ptfe tube guide on the bottom face of housing
Post-processing:
- Cut bridge layer into screw holes on the front face of the housing
- Drill a 2.5 mm diameter hole into the filament guide
- Melt heat inserts into 8 holes on the side faces of the housing
- Cut 21 mm length ptfe tube and press into the hole on bottom face of the housing
- (Optional) Press ptfe tube fitting into filament guide on the top face of the housing, insert a piece of ptfe tube into the fitting
Contact me:
Gmail: [email protected]
Telegram: @artymakarov
YouTube: https://youtube.com/@3DNaGrani
Special thanks:
K3D // Dmitry Sorkin - Concept & PR
Mayoroffk // Mayorov Kirill - Extrusion gears design & tests
Fysetc - Extrusion gears production
K3D Telegram Chat Users - Extrusion gears tests