3D EDGE Creality Sprite Extruder Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgraded 3d printed housing for Creality Sprite extruder. Highly recommended with upgraded extrusion gears from Fysetc.
- Rating
- 5 / 5
- Likes
- 69
- Downloads
- 295
- Makes
- 0
- Views
- 2,127
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Attention: This model is NOT compatible with stock extrusion gears
BOM:
Filament recomendations:
PP, PA, ABS with glass of carbon fiber
Print settings:
Line width: 0.4 mm
Layer height: 0.16 mm
Perimeters: 5
Tops and bottoms: 8
Infill: doesn't matter
Support: custiom only for ptfe tube guide on the bottom face of housing
Post-processing:
- Cut bridge layer into screw holes on the front face of the housing
- Drill a 2.5 mm diameter hole into the filament guide
- Melt heat inserts into 8 holes on the side faces of the housing
- Cut 21 mm length ptfe tube and press into the hole on bottom face of the housing
- (Optional) Press ptfe tube fitting into filament guide on the top face of the housing, insert a piece of ptfe tube into the fitting
Contact me:
Gmail: [email protected]
Telegram: @artymakarov
YouTube: https://youtube.com/@3DNaGrani
Special thanks:
K3D // Dmitry Sorkin - Concept & PR
Mayoroffk // Mayorov Kirill - Extrusion gears design & tests
Fysetc - Extrusion gears production
K3D Telegram Chat Users - Extrusion gears tests