mozDRAWER: Simple Drawer on a Rail. Uses 608 bearings.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
8x 608 bearings 8x m4x14mm bolts 8x m4x12mm washers 8x m4 nuts 18-40x #6x1/2" wood screws
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Gather:
8x 608 bearings
8x m4x14mm bolts
8x m4x12mm washers
8x m4 nuts
18-40x #6x1/2" wood screws
Print:
2x Guides
2x Rails
2x Caps
6x Risers (if needed)
1x Drawer
You may have to put the drawer on its back side in the slicer.
I recommend printing 1 rail at a time, slowly, with a nice brim.
Put the bearings onto the guides with the m4x14s, nuts, and washers.
Attach risers if using them.
Mount 1 guide to underside of table/desk.
Slide drawer on and position other guide.
Screw the 4 accessible screws and then slide the drawer off and screw in the rest.
Slide the drawer back on and screw the caps onto the rails.
This thing is surprisingly sturdy.