1 / 3
mozDRAWER: Simple Drawer on a Rail. Uses 608 bearings. — image 1
1 / 3

mozDRAWER: Simple Drawer on a Rail. Uses 608 bearings.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

8x 608 bearings 8x m4x14mm bolts 8x m4x12mm washers 8x m4 nuts 18-40x #6x1/2" wood screws

Rating
0 / 5
Likes
17
Downloads
42
Makes
0
Views
508
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

Gather:
8x 608 bearings
8x m4x14mm bolts
8x m4x12mm washers
8x m4 nuts
18-40x #6x1/2" wood screws

Print:
2x Guides
2x Rails
2x Caps
6x Risers (if needed)
1x Drawer

You may have to put the drawer on its back side in the slicer.
I recommend printing 1 rail at a time, slowly, with a nice brim.

Put the bearings onto the guides with the m4x14s, nuts, and washers.
Attach risers if using them.
Mount 1 guide to underside of table/desk.
Slide drawer on and position other guide.
Screw the 4 accessible screws and then slide the drawer off and screw in the rest.
Slide the drawer back on and screw the caps onto the rails.

This thing is surprisingly sturdy.

Tags