Suzo Happ Power Pro Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NOT AN ELECTRONICS EXPERT PRINT AT YOUR OWN RISK This print is a WIP. I designed this cover to fit over the front of…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
NOT AN ELECTRONICS EXPERT PRINT AT YOUR OWN RISK
This print is a WIP.
I designed this cover to fit over the front of my Suzo Happ Power Pro PSU for my supergun. It has a hole for an IEC power socket. It designed it to fit the snap in style sockets, BUT my snap in socket would not snap in(filament tolerances). I ended up using a screw in style socket and just drilling the holes for the screws.
There is hole for me to feed the supergun wires out and another hole so I can get a long screwdriver in, in the event I need to adjust the 5V rail.
I've made the face thickness slightly thinner to try and account for filament/printer tolerances so snap in style socketsshould work, but I suspect there will be more revisions in thee future to try and dial this in.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
200
Infill:
38
Filament:
PolyMaker PETG
Category: Electronics