Suzo Happ Power Pro Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NOT AN ELECTRONICS EXPERT PRINT AT YOUR OWN RISK This print is a WIP. I designed this cover to fit over the front of…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
NOT AN ELECTRONICS EXPERT PRINT AT YOUR OWN RISK
This print is a WIP.
I designed this cover to fit over the front of my Suzo Happ Power Pro PSU for my supergun. It has a hole for an IEC power socket. It designed it to fit the snap in style sockets, BUT my snap in socket would not snap in(filament tolerances). I ended up using a screw in style socket and just drilling the holes for the screws.
There is hole for me to feed the supergun wires out and another hole so I can get a long screwdriver in, in the event I need to adjust the 5V rail.
I've made the face thickness slightly thinner to try and account for filament/printer tolerances so snap in style socketsshould work, but I suspect there will be more revisions in thee future to try and dial this in.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
200
Infill:
38
Filament:
PolyMaker PETG
Category: Electronics