RT-50A Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for a MeanWell RT-50A power supply
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I have a supergun that I use to power some arcade hardware I own. These superguns need 5V, 12V, and -5V power to operate. The MeanWell RT-50A provides all three.
This case is just a shell for this PSU so I can switch it on and off and not worry about zapping myself. It works with both screw-in and snap-in IEC sockets. These sockets are readily available on Amazon. There is a hole in the front to allow for passing of the supergun's power cable.
I have a couple different superguns that use different styles of cables that are all meant to be screwed into one of these power supplies. The hole was just a lazy way to allow for any style of cable without having to do anything special.
There is also a port for a voltage/amperage readout LCD. These are pretty common. You can find them on Amazon or Aliexpress.