RT-50A Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for a MeanWell RT-50A power supply
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 21
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I have a supergun that I use to power some arcade hardware I own. These superguns need 5V, 12V, and -5V power to operate. The MeanWell RT-50A provides all three.
This case is just a shell for this PSU so I can switch it on and off and not worry about zapping myself. It works with both screw-in and snap-in IEC sockets. These sockets are readily available on Amazon. There is a hole in the front to allow for passing of the supergun's power cable.
I have a couple different superguns that use different styles of cables that are all meant to be screwed into one of these power supplies. The hole was just a lazy way to allow for any style of cable without having to do anything special.
There is also a port for a voltage/amperage readout LCD. These are pretty common. You can find them on Amazon or Aliexpress.