1 / 4
2x16 lcd cover snap on (works for i2c as well)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
snap on cover for 2x16 lcd for Arduino projects works for i2c module and the normal one
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 513
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
print with flat part on the bed no supports or brim needed. pla works fine
IMPORTANT: make sure that the cover is put the right way around as the wrong way can leave a gap on the front
can be removed