1 / 4
Dual z bracket fot Ender3 V3 SE/KE
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket that allows mounting additional z motor on the right side of the gantry
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 130
- Wydruki
- 2
- Wyświetlenia
- 2029
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 13)Remiksy (0)Kolekcje (65)Powiązane
Greetings,
Introducing dual z mod, allowing seamless addition of an extra z axis motor. This component is designed with easy installation and minimal disruption to the existing structure in mind. Now you can enhance the performance of your printer without the need to drill additional holes in the gantry. Part was designed for my friend, and he was testing it for a while. Nothing seems to be not working, so I'm uploading this here
🔩 Specifications:
- Print with PETG/ABS/ASA for maximum strength and resistance to high temperatures, ensuring stability.
- Supports are required - or if You trust your printer You can print this like on last pic.
🔧 Installation:
- Part is designed for use of heat inserts (4.2mm diameter of the holes)
- print two nuts and insert them where side holes are, then screw them tightly after mounting it on the gantry.
🛠 Tailor to Your Tastes:
- I encourage experimentation with configuration and sharing of your ideas. I'm eager to adjust the design to meet your expectations.
