EcoFlow Delta Pro Remote Wall Mount (EFDPRWM)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple wall mount for the EcoFLow Delta Pro remote control
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 727
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Anyone who has their Ecoflow DP at the back of the garage, for example, or has set it up in such a way that they are dependent on the remote control, will perhaps be pleased with this simple but functional wall bracket.
There are enough holes to fix it to the surface.
I would print the bracket flat on the bed. Use tree structure supports on the printing plate only. Works with 0.4mm nozzle as well as with 0.6mm. I used ASA as the filament. But it should work with any other filament too.
V2 - April 24: a few minor adjustments for better access to the connection socket