EcoFlow Delta Pro Remote Wall Mount (EFDPRWM)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple wall mount for the EcoFLow Delta Pro remote control
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 57
- Makes
- 0
- Views
- 727
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Anyone who has their Ecoflow DP at the back of the garage, for example, or has set it up in such a way that they are dependent on the remote control, will perhaps be pleased with this simple but functional wall bracket.
There are enough holes to fix it to the surface.
I would print the bracket flat on the bed. Use tree structure supports on the printing plate only. Works with 0.4mm nozzle as well as with 0.6mm. I used ASA as the filament. But it should work with any other filament too.
V2 - April 24: a few minor adjustments for better access to the connection socket