Soldering Jig for MCSBC-SVR | MPPT Solar Battery Charger and Regulator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This soldering jig is designed to make it easier to assemble the MCSBC-SVR.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
---
Print it with 0.2mm layer height and a 0.4mm nozzle (or whatever works for you). No supports or brims are needed. The tolerances on this are tight. Depending on how tuned your printer is you might need to adjust the size by a little bit.
There are two version numbers in the name of each file. “MCSBC-SVR-v1.1” refers to the version number of the solar module itself. The latest MCSBC-SVR version, v1.1.1, is physically the same as v1.1. The stack & solder process is the same for both. V1.1.1 added or slightly modified functionality.
Configuration and Assembly
See the attached PDF for module details and assembly instructions. Both v1.1 and v1.1.1 datasheets/configuration instructions are attached here (the most recent version is rev1.5).