1 / 2

Nextruder Transparent front case (PETG)

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Transparent PETG Nextruder front case optimized for printing with a nextruder (Prusa XL or Prusa Mk4)

Aktualizacja u źródła: 19 gru 2025

Informacje o modelu

Please read all the steps:

using transparent PETG, print the model on a smooth plate ( I used https://www.aliexpress.com/item/1005007385189249.html or https://www.aliexpress.com/item/1005008566969906.html 100℃. For other plates, change the bed temperatures)
after opening the idler, remove the old front case:
remove the washer from the old case:
insert the washer into the new case:
clear the holes (if necessary):
put a drop of machine oil in the center the clear the view
put the new cover on the extruder
tighten the three M3x25 screws on the PG-case in the correct order (shown on the picture)

The settings I started from are from this model.

Here are some additional videos: