Nextruder Transparent front case (PETG)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Transparent PETG Nextruder front case optimized for printing with a nextruder (Prusa XL or Prusa Mk4)
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 52
- Makes
- 0
- Views
- 881
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Please read all the steps:
using transparent PETG, print the model on a smooth plate ( I used https://www.aliexpress.com/item/1005007385189249.html or https://www.aliexpress.com/item/1005008566969906.html 100℃. For other plates, change the bed temperatures)
after opening the idler, remove the old front case:
remove the washer from the old case:
insert the washer into the new case:
clear the holes (if necessary):
put a drop of machine oil in the center the clear the view
put the new cover on the extruder
tighten the three M3x25 screws on the PG-case in the correct order (shown on the picture)
The settings I started from are from this model.
Here are some additional videos:
Nextruder disassembly:
transparent prints: