Multi Position PCB Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D printed clamp for clamping PCB boards with a max width of 72mm, and a max length of 150mm. I will design…
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 1262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 3D printed clamp for clamping PCB boards with a max width of 72mm, and a max length of 150mm. I will design other clamps for wider boards. The clamps rotate 90 degrees as shown in pictures. You will need to print 1 of each part except for CLMPS.PT2., of which 2 needs to be printed. NOTE: BASE. is 200mm tall.
Instructable with assembly instructions: https://www.instructables.com/Multi-Position-PCB-Clamp/
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
n/a
Infill:
20%
Filament: n/a n/a n/a
Notes:
BASE. and END.BRKT. print on their backs (clamp mounting studs up) without support.
Category: Tool Holders & Boxes