Crown arcade button (30mm) wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crown 30mm buttons are pretty good, to me as good as Sanwa OBSN-30RG - inside they use a Cherry MX keyswitch. Genuine…
- Ocena
- 4 / 5
- Polubienia
- 10
- Pobrania
- 56
- Wydruki
- 2
- Wyświetlenia
- 396
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Crown 30mm buttons are pretty good, to me as good as Sanwa OBSN-30RG - inside they use a Cherry MX keyswitch. Genuine Cherry switches are rated for 50 million stroke lifetime. They have a weird kind of castellated ring nut, not a big hex nut like Suzo Happ. Anyway, this wrench is for those. This should fit in most areas with minimal clearance. The hole on the opposite end of the wrench is for a breaker bar but don't tighten with this, remember it's only plastic - only use a bar if the button is too tight or the plastic is stuck and you need to get it undone.
No support required if printed with castellations upward.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.30
Infill:
n/a
Filament:
MG Chemicals PETG Black
Category: Video Games