1 / 4
Spinning Hanger (Painting tool)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spinning tool I designed to hang small parts from and be able to rotate.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A spinning tool I designed to go through the top of a cardboard box to be able hang small parts from rotate them for full paint coverage. Requires a 608 bearing, I used a 3Dprinted one and it turned out very well. Both parts were printed at .2 layer height with 4 walls, bottom and top layers and a 30% gyroid infill. Both parts should be oriented with their largest flat side down, pt. 1 will need some support from the baseplate. included .3mf file has parts oriented correct with supports added where needed.