1 / 4
Spinning Hanger (Painting tool)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spinning tool I designed to hang small parts from and be able to rotate.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 26
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A spinning tool I designed to go through the top of a cardboard box to be able hang small parts from rotate them for full paint coverage. Requires a 608 bearing, I used a 3Dprinted one and it turned out very well. Both parts were printed at .2 layer height with 4 walls, bottom and top layers and a 30% gyroid infill. Both parts should be oriented with their largest flat side down, pt. 1 will need some support from the baseplate. included .3mf file has parts oriented correct with supports added where needed.