1 / 4
Nvidia Tesla P40 fan shroud for dual 4020mm fans — zdjęcie 1
1 / 4

Nvidia Tesla P40 fan shroud for dual 4020mm fans

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fan shroud for the Tesla P40 with a shorter depth for dual 4020 fans, based on a design found on OnShape

Ocena
0 / 5
Polubienia
19
Pobrania
315
Wydruki
1
Wyświetlenia
2271
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

This is a small remix of an existing model I found on onshape. All credits to the original designer of the fan shroud. 

I'm using sunon fans with the product id mf40201vx-1000u-a99. These are Sunon 40x40x20mm fans.  They are not expensive at all and have reasonable CFM. The retail price is around 3 to 4,- EUR each.  These are  2 wire versions, so no (built-in) speed control or RPM measurements, but it cools the card.  These are not super silent, but good enough for me.

The fans come without connector so I used on molex connector for the 12V power from another fan (Xilence) that had 3pin motherboard + molex connector, stripped the wires and soldered the sunon to this molex connector. 

I have not tried to connect them directly to a motherboard fan header, it should work if you have the adapter or material to crimp the connector.  These fans don't consume too much power, but no guarantees and on your own risk.

From the datasheet of the fans: 

  • sunon mf40201vx-1000u-a99
  • 10.8 CFM
  • 27 db(A)
  • 0.29 static pressure
  • 8000 rpm

 

In total my system has an additional PWM case fan (80mm for now, will replace with 120mm fan) the CPU fan is a xilence fan. 

Here are some nivida-smi stats while running the mixtral model:

 

The link to the onshape model, this remix : https://cad.onshape.com/documents/51405403b52300df30ff8d0b/w/953560f04b1bac7cc93d4eff/e/e8275dc6d357f0069196c22d?renderMode=0&uiState=65fee915cb9cb5171fff66cb

The link to the original onshape model, all credits to the author, longer in depth : https://cad.onshape.com/documents/ac146f2abb8a7e81157c56d2/w/ee4f24dce47b5241f23bd6e8/e/d01b1ec2abc51dc45df5fe05?renderMode=0&uiState=65feeb20c1c4d963c4eeb84f

Tagi