3M adapter to Sperian Survivair cartridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to adapt the Sperian Survivair cartridges to a 3M bayonet style mask. the mask I have is the 6000 series mask.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is to adapt the Sperian Survivair cartridges to a 3M bayonet style mask. the mask I have is the 6000 series mask, however, it should fit most as long as it has the male bayonet fittings.
I combined two other Things to make this since user RoJSimpson modeled the threads and user VinnytheKnight made the bayonet portion.
Hopefully this helps if you had a bunch of Sperian filters but no mask!
The overhangs are rough because I used no supports, near impossible to get them out. Use 100% fan and it should turn out with a few string to snip off.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30
Category: Parts