1 / 3
Creality K1 Series X Carriage Bearing Washers — zdjęcie 1
1 / 3

Creality K1 Series X Carriage Bearing Washers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lock in place the bearing when removing the springs

Ocena
5 / 5
Polubienia
84
Pobrania
439
Wydruki
3
Wyświetlenia
2653
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Removing the spring can be a solution to resonance issue but:

if you remove them, the bearing on which they were acting is free to slide left and right a tiny bit before being locked by these two screws:

credits to @Henlor for the pictures from this model: https://www.printables.com/model/607481-creality-k1-x-carriage-cad

 

I designed two particular washers to use with the two screws so that they would hold the bearing in place and prevent unintended movements.

 

Print settings: 

  • 0.1 mm layers
  • 100% infill
  • material: i used PCPBT, use high temp resistant one

 

Give it a chance, it could be the solution, let me know if it works also for you!

Tagi