1 / 3
E3D V6 and V6 Volcano HotEnd 40mm Noctua Fan Adapter — zdjęcie 1
1 / 3

E3D V6 and V6 Volcano HotEnd 40mm Noctua Fan Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fan adapter to get better airflow and quieter operation.

Ocena
5 / 5
Polubienia
3
Pobrania
53
Wydruki
0
Wyświetlenia
381
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

An adapter I made for the E3D Volcano HotEnd. Now you can switch out the stock 30mm fan to any Noctua 40mm fan would like. 

ABS/ASA/PC/PETG are a must for this print. You will need any high temp filament for this print to function properly

I printed it in the same ordination that it will be installed with much success. Supports are a must. I used a 3mm screw to mount the fan to the adapter. You also can use a 6-32 screw as well. 

If you have any suggestions let me know. 

Tagi