1 / 7
K8200/3Drag GT2 Y Belt Mount with easy Tension - Upgrade — zdjęcie 1
1 / 7

K8200/3Drag GT2 Y Belt Mount with easy Tension - Upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This simple construction are for upgrading your K8200/3Drag to GT2 belt on Y axis.

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
243
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This simple construction are for upgrading your K8200/3Drag to GT2 belt on Y axis.
It is a direct replacement, reusing the original mount screw and holes, adding the missing belt tension.

For complete upgrade of Y axis to GT2, you need:

  • GT2 6mm belt (mine is from eBay)
  • GT2 pulley for motor (20 teeth and 5mm motor hole)
  • The printed parts (2x wedge + mount + clamp)
  • Two M3x30mm screws
  • Two M3 nuts Assembly as shown on pictures

Updated: Included STEP files for use in CAD programs.

>> If you like it, please leave a like, rating or a tip... :)

Print Settings

  • 0.20mm layer height, 15% infill
  • 2 perimeters, 3 top and 2 bottom layers
  • No support needed

Tagi