1 / 7
K8200/3Drag GT2 Y Belt Mount with easy Tension - Upgrade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This simple construction are for upgrading your K8200/3Drag to GT2 belt on Y axis.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This simple construction are for upgrading your K8200/3Drag to GT2 belt on Y axis.
It is a direct replacement, reusing the original mount screw and holes, adding the missing belt tension.
For complete upgrade of Y axis to GT2, you need:
- GT2 6mm belt (mine is from eBay)
- GT2 pulley for motor (20 teeth and 5mm motor hole)
- The printed parts (2x wedge + mount + clamp)
- Two M3x30mm screws
- Two M3 nuts Assembly as shown on pictures
Updated: Included STEP files for use in CAD programs.
>> If you like it, please leave a like, rating or a tip... :)
Print Settings
- 0.20mm layer height, 15% infill
- 2 perimeters, 3 top and 2 bottom layers
- No support needed