Counting matching models…
This is a small adapter piece that replaces the existing plastic piece on the Velleman STAND20 universal soldering stand. I printed this in PETG for better heat resistance when accidentally touching the plastic with the Pinecil.
Hey Guys, simply put there was too much dust accumulating in my printer so I decided to add a cover to it. While there are already many approaches to this topic on Thingiverse, I wanted to do my own one and of course share it with all of…
created as part of my Wall Gears V2.1 project. allows you to convert a dual motor by velleman or Tamiya gearbox into 2 singles, mounting holes setup for flat mounting Category: Hobby
Just wanted a nice protective case for this Velleman kit EDU08 Digital Educational Oscilloscope. You need to print: 1x Case front 1x Case rear 6x Button 4x Distances (between the 2 PCBs, one side is beveled for easier assembly) You can…
You will need 2 M2x15mm screws for the e3d v6 hotend and you must drill to 3mm the old little fan screw holes for pass thru with the m3 screws. wenn you are using the fan duckt you have to lower the fan speed to about 8% and leave it…
My first original design! A simple multiboard holder for the Velleman soldering accessories/cleaning kit. Printed with PLA+, 0.2mm layer height, 20% infill, 3 walls. Supports are very necessary!
Bed Model to use with Simplify3D, PrusaSlicer... Category: 3D Printing
Spacer + T-slot block to mount things with 3 mm distance to the alfer coaxis 27,5 aluminium extrusions. Use M3 screws and nuts for the recommended M3 Version or 3,5 to 4 mm spax screws for the not recommended standard version. 2018-01-16:…
Edit 12/06/19: Added Pictures of the finished solution. I have been looking for a great way to make the Z axel go up and down. I have tried a DOZEN designs and none where what I was looking for. Now I have designed my own one and it is in…
A common Housing for a Velleman K8200/3Drag Controller and a Raspberry Pi with Camera (especially for octoprint) Take the webcam housing and the cover from here: Raspberry Pi Camera Housing Attach controller and Pi with short 3 mm pan…
I used PLA because it warps the least. Works great! For me it's a perfect tight fit.
Velleman KSR11 constructor spare part, right side. Look on the picture, inside red circle. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: No Resolution: 0.2mm Filament: gembird PLA+ black Category: Mechanical Toys
Heizbett für den Velleman Vertex K8800. Ich wollte den Drucker nicht unnötig verändern, darum habe ich das Heizbett unter der originalen Druckplatte untergebracht. Als Heizung dient ein 12V 50W 100x100 mm Heizpad, das über einen…
Initially made for the Velleman VTSS4N soldering station. However I do know that there are some other brands that use the exact same housing and are most likely also compatible with this model. I haven't tested it, but judging from the…
@Bo_Ris kindly supplied me with the original CAD files of his Ikea Lamp Mount. I split his model into single parts and he asked me to post them as remix. This remix didn't take any real effort, all credits go to @Bo_Ris. He's a great…
Tensor para correa del eje X de la impresora Velleman K8200 ·Configuración de impresión FDM Impreso con calidad 0.2 de resolución y relleno (0.4) cada 2 capas para ahorrar tiempo de impresión. La tasa de llenado debe ser al menos del…
If you have mounted the E3D V6 on the extruder, the original adpater is too high, this one is 2 mm lower and will allow it to be mounted. It might need a Little CA glue ;-) Category: 3D Printer Extruders
A Project Box to fit the Velleman Voice Changing Electronics Kit
I do like all the designs of StoniXX for the Vertex Delta K8800 This is not a real remix, but more of an add on... My mosfet heatsink was somewhat bigger, and couldn't fit it in the housing. So I made this, it's an extension of the…
Motorabdeckungen für den Velleman Delta K8800 Printer. https://www.thingiverse.com/groups/vertex-k8800 Print Settings Printer Brand: Deltaprintr Printer: Deltaprintr Kit Rafts: Yes Supports: Doesn't Matter Resolution: 0.1 Infill: 30%…
Notaus für den Velleman K8800. Der Schalter erzeugt einen Reset in der Steuerung. Der originale Reset Knopf ist im Betrieb nicht zu erreichen, der Netzschalter auf der Rückseite ist ebenso ungünstig gelegen. Wer den K8800 hat, weiß das…
E3D nozzle holder to rest on the edge of the Velleman Vertex K8400 printer frame. I have oversized the holes as they shrink on my printer (Any advice or feedback appreciated)
Clips to allow the Velleman LED kit for the Vertex K8400 printer to be angled towards the print bed. This provides much better illumination of the print bed and makes the lighting kit more effective. Print Settings Printer: Velleman…
Had a go with Tinkercad trying to make my first thing and this is what i came up with, needed some scaling in Cura but managed to make it work :) if it is not quite right in any way then the files are saved at tinkercad's web site. I plan…
Preferably printed with PETG, ASA, or other high-temperature filaments to avoid melting due to being close to soldering iron.
Erhöhung für die Spulenhalterung am Vellman K8800. War notwendig, da ich vereinzelt Spulen hatte, die etwas deformiert waren und am Druckergehäuse geschliffen hatten. Ideal in Kombination mit der Filamentführung…
Upgrade für mein Projekt Heizbettregelung https://www.thingiverse.com/thing:3430150 Mich hat immer gestört, das der Regler extern auf dem Tisch stand. Nun habe ich das Gehäuse geändert, so das der Regler fest am Drucker montiert ist.…
This is tool holder adaptation for my Vellerman mini-drill. I changed tool-holder to adapt for my drill, added notches to prevent tool rotation. Removed some unnecessary (I guess) material, for better visibility of a workpiece and drill…
n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
This is a small brackets that slides into the Extrusion of a Velleman K8200 or 3Drag 3D printer. Is allows an M3 nut to be inserted into the back and then an M3 bolt to be inserted from the front, allowing accessories to be mounted to the…
A spool clip for 1.75mm Velleman filament spools. It is 10mm thick by default, but you can scale the Z dimension to change this Instructions Print these at 0.2mm layer height. Use a low infill, if any, as this will keep them flexible…
I built the Whadda/Vellemann bat detector kit (it's sold under different names, for example this one:…
I've created an enclosure for an Velleman MK190 2X5W Amplifier. The lid can be glued with 1-second glue (or something simular). I've kept the LED out of the design to make it more appealing.
PERSONAL USE ONLY Velleman WSAH171 protective case. You need to print the push button 4 times. The ticker side of it needs to stay inside the case, that is the part that presses the button. Needs support on the battery spot
For some kind of filament spools it is necessary to have a return pulley. You can use 2 M4x16mm countersunk screws for the riser to fix this. I used 2 608zz bearings UPDATE: an improved version better for large spools. It reduces the…
If you use 40mm fan duct ( http://www.thingiverse.com/thing:672780 ) like me, you maybe dont like to have a hole in the bottom of your vertex. Here is a blind cover with Vertex Logo. Category: 3D Printer Accessories
I lost the knob for my soldering station so I designed one and printed. Printed at 0.12 with a 0.4 nozzle. The base where the knob is inserted has a 3.15mm width. So the hole of the knob is 3.46 mm to easily insert it and store it in the…
n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
I'd recommend you print this with either a skirt or brim with at least a 10-15% infill for maximum strength & durability.
Replacement for missing ring in the solder iron holder. Print instructions Category: Electronics
